Inter VLAN routing 240 VAC 2A 115.2 Kbps Used Cisco Equipment 2611 with 50 MHz RISC

Inter VLAN routing 240 VAC 2A 115.2 Kbps Used Cisco Equipment 2611 with 50 MHz RISC

The Cisco 2600 series shares modular interfaces with the Cisco 1600, 1700 and 3600 series, providing a cost-effective solution to meet today`s branch office needs for applications such as:
Secure Internet/intranet access with Firewall protection
Multiservice voice/data integration
Analog and digital dial access services
Virtual Private Network (VPN) access
Inter-VLAN routing

The Cisco 2600 series is available in the following three performance levelsand six base configurations:
Cisco 2650 and Cisco 2651up to 37K packets per second (pps), one and two auto sensing 10/100 Mbps Ethernet ports
Cisco 2620 and Cisco 2621up to 25K pps, one and two auto sensing 10/100 Mbps Ethernet ports
Cisco 2610 through Cisco 2613 up to 15K pps
Cisco 2613 One Token Ring port
Cisco 2612 One Ethernet port, one Token Ring port
Cisco 2611 Two Ethernet ports
Cisco 2610 One Ethernet port
Each model also has two WAN Interface Card (WIC) slots, one Network Moduleslot, and one internal Advanced Integration Module (AIM) slot. These slots sharemore than 50 different modules across four Cisco product lines. All Cisco 2600sinclude the Cisco IOS IP feature set; other feature sets may be selected asupgrade options.
Specifications

Console Port/Speed
115.2 Kbps

Auxiliary Port/Speed
115.2 Kbps with Dial on Demand Routing capability

Processor
Motorola MPC860 80 MHz RISC (Cisco 265x); 50 MHz RISC (Cisco 262x); 40 MHz RISC (Cisco 261x)

DRAM Memory
Two DIMM slots supporting, 32 to 64MB (Cisco 261x and Cisco 262x, uses DRAM); 32 to 128MB (Cisco 265x only, uses SDRAM)

Flash Memory
One SIMM slot supporting, 8 to 16MB (Cisco 261x); 8 to 32MB (Cisco 262x and Cisco 265x )

Software options
IP feature set bundled with chassis, other IOS feature sets offered as upgrade options
Supported Releases: 11.3T or later, including 12.0 and 12.0T

Other components included with Chassis
IP IOS feature set, requires Flash and System Memory to support the IP feature set
Power Cable
LAN Cable(s)
Auxiliary and Console Cables
19 in. Rack Mount Brackets
Configuration documentation
Reference documentation (CD ROM)

Router management options
Cisco View, Cisco Works, Cisco Voice Manager, ConfigMaker, Enhanced Set-up


Power Requirements for Cisco 2600 Series
Description
Specification

Power Dissipation
72W max.

AC input voltage
100 to 240 VAC

AC input current
1.5A

Frequency
47 to 64 Hz

DC Input Voltage
-38V to -75V

DC Input Current
2A

Physical and Environmental Specifications for Cisco 2600 Series
Description
Specification

Operating Temperature
32 to 104¦F (0 to 40¦C)

Storage Temperature
-13 to 158¦F (-25 to 70¦C)

Humidity
5 to 95% non-condensing

Noise Level
38 dbA min./ 42 dbA max.

Dimensions (H x W x D)
1.69 x 17.5 x 11.8 in. (4.3 x 44.5 x 30 cm)

Weight (average shipping)
8.85 lb. (4.02 kg) min.
10.25 lb. (4.66 kg) max.